TPG-700AKDS錐形規製動夾具/錐形規階梯式刻度帶固定夾具
可以保持錐形規的測量位置。
在難以確認刻度的測量環境下，發揮威力!
用途
用錐形規測量孔徑和槽寬時,即使在難以確認測量值的測量環境下也能保持測量值,能簡單地進行測量後的數值確認
通過讀取錐形規的刻度和錐形規製動夾具的端麵位置，防止視差
本體材質
ABS
特長
錐形規的保持力可以通過調整螺絲來變更
使用錐形規和製動夾具 (各2組)、15cm直尺,可簡單地進行簡單的孔芯間的測量
規格
對應錐形規:測量範圍1~15mm、板厚1.0.1.2mm(規格#700款)
對應直尺:長150mm,寬15mm、厚0.5mm(JIS規格金屬製直尺150mm)
錐形規的使用可能範圍:1~14mm
測量孔中心之間時..適用孔徑: 2~14mm
.芯間測量範圍:60~140mm
.測量精度:約0.5mm
|
型號
|
精度
|
重量
|
|
TGS-15
|
製動夾具單品
|
16g
|
|
TPG-700AKDS
|
製動夾具十階梯刻度錐形規套裝
|
26g
|
![]()
![]()
TPG-700AKDS TAPER GAUGE STOPPER/ TAPER GAUGE KAIDAN WITH STOPPER
Capable of retaining the measuring position of Taper gauge. Useful when reading scale in a hard-to-see environment.
USE
When measuring hole diameter or groove width with a taper gauge, the measured value is retained even in a measurement environment where it is difficult to check the measured value
For prevention of parallax by reading scale of taper gauge and end face position of taper gauge stopper
MATERIAL
ABS (body)
FEATURES
Retaining force of the taper gauge can be changed with the adjusting screw.
Simple center-to-center measurement is possible by combination use of taper gauge, stopper (2pcs each) and a 15cm ruler.
SPECIFICATIONS
Applicable taper gauge: Measuring range 1~15mm, Thickness 1.0・1.2mm (Standard #700 type)
Applicable ruler: Length 150mm, Width 15mm, Thickness 0.5mm (JIS straight metal ruler 150mm)
Taper gauge useable range: 1~14mm
When measuring center-to-center ...Applicable hole diameter: $2~14mm
...Center-to-center measuring range: 60~140mm
..Measurement accuracy: Approx.0.5mm
|
Model no.
|
Configuration
|
weight
|
|
TGS-15
|
STOPPER
|
16g
|
|
TPG-700AKDS
|
STOPPER + TAPER GAUGE KAIDAN TPG-700AKD (SET)
|
26g
|